Siemens 2015 - Manual (Page 28)

Important basic settings
19
Gigaset 2015 plus, GBR: A30852-X-1105-B301-1-7619 kap07.fm5 29.10.99
Changing length of pause after trunk code/main trunk code
Possible pauses:
1 second
2 seconds
3 seconds (default)
6 seconds
Deleting trunk code/main trunk code
Changing the system code/PIN
Your Gigaset 2015 plus has two 4-digit “code numbers”
for protecting basic and individual settings; these are the
system code and the handset PIN (Personal Identification
Number). The default setting for both is “0000”.
You must know the system code in order to carry out im-
portant basic settings, or to lock the unit for outgoing
calls. It is the main key to your Gigaset 2015 plus.
Using the PIN, you can protect the settings which prima-
rily affect the handset or units, but do not affect the basic
functions of the base station. For greater security, you
should enter a new system code and a new PIN.
B
# 1 Start the procedure.
o
Enter the 4-digit system code (default: “0000”).
O
0 2 4
B Select 1-second pause.
or
O
0 2 5
B Select 2-second pause.
or
O
0 2 0
B Select 3-second pause (default).
or
O
0 2 1
B Select 6-second pause.
B
# 1
Start the procedure.
o
Enter the 4-digit system code (default: “0000”).
O
2 5 3
B Delete the trunk code/main trunk code.