Siemens 2015 - Manual (Page 17)

Outgoing calls
8
Gigaset 2015 plus, GBR: A30852-X-1105-B301-1-7619 kap04.fm5 29.10.99
Suppressing code numbers for redial
When you dial a telephone number it is incorporated into
the redial list. Both the number dialled after this number,
e.g. an extension number and a subsequent secret “serv-
ice number” is added to the telephone numbers in the re-
dial list. To prevent the incorporation of secret numbers,
activate “temporary tone dialling” – e.g. after the exten-
sion number (➔ page 53) even if your telephone is set to
tone dialling.
Suppressing display of telephone numbers on called party’s unit
To suppress display of your telephone number on the
called party’s unit, use a sequence of telephone services
(CLIR). To do this, your telephone must be set to tone di-
alling (DTMF).
Dialling with speed dialling numbers
If you have programmed speed dialling numbers
(➔ page 32), you can dial the associated number by enter-
ing a speed dialling number.
c Press the off-hook key.
*31# Enter Service sequence for telephone number suppres-
sion, wait for dial tone and then
o
dial the telephone number.
A prerequisite here is that the network provider
must support this function.
c Seize the dialup line. You hear dial tone.
Q
o
Press the speed dialling key and enter the speed dialling
code (0 to 9) for the required number.
or
Q If you are not sure of the speed dialling code for the
required number: keep pressing the speed dialling key
until both numbers appear on the display.
o Enter the speed dialling code displayed (4 in this
example).