Siemens 2015 - Manual (Page 58)

The answering machine
49
Gigaset 2015 plus, GBR: A30852-X-1105-B301-1-7619 kap12.fm5 29.10.99
If the intermezzo function is activated (➔ page 23), there
is a pause in playback after each message and playback
does not continue until key
W has been pressed.
Messages with telephone number transmission
For further information, please refer to the section on re-
mote operation functions under “Calling back callers”
➔
page 53.
Skipping forwards and backwards during playback
Interrupting playback
Aborting playback (cancelling)
The number of the current message is indicated
on the 2-digit LED display at the base station.
The messages are played back via loudspeaker
and at the handset. The number is indicated au-
tomatically at the start of each message. If the
time stamp function is activated (➔ page 23),
the time of the message is also indicated.
Ê To move on to the next message:
Press the key at the base station.
or
È To play back the current message again:
Press the key at the base station briefly (< 1 sec.).
or
И И ... To skip back several messages:
Press the key several times in quick succession
(maximum of 1 sec. between keystrokes).
or
È To skip back to the first message:
Hold down the key at the base station.
Note when branching forwards to the next
message: after a message has been played
back for two seconds, it is classified as having
been “listened to”.
Ì Press the key at the base station. Playback is interrupted.
A reminder announcement is provided: “Pause“.
É To continue playback:
Press the key.
М М Press the key at the base station twice. An acknowledge-
ment tone is heard.