Siemens 2015 - Manual (Page 16)

Outgoing calls
7
Gigaset 2015 plus, GBR: A30852-X-1105-B301-1-7619 kap04.fm5 29.10.99
Outgoing calls
Calling an external number
Dialling with number check
You can enter the number and then check it before setting
up the connection.
Calling back a caller
While you are listening to a message from your handset
the caller’s telephone number appears in the display.
While the message is being played, press the 4 key to
make a call to the sender of the message (for further in-
formation ➔ page 53).
c Press this key (“off-hook”). You hear dial tone.
o Enter the required number on the keypad of the handset.
You can then check this number on the display.
The number can consist of a maximum of 22
digits.
o
Enter the required number on the keypad of the mobile
unit. You can then check this number on the display, e.g.:
:
Q If nessesary, press speed dial key to delete last digit.
c
Press the key within 30 seconds to seize the dialup line.
The number is dialled after a brief interval. Ringing tone
is then audible.
or
a
If the number has been entered incorrectly, press this
key. The input is cancelled. Enter the number again.
123456
f
N