Internal consultation and call transfer – Siemens 2015 User Manual
Page 21
Internal consultation and call transfer
12
Gigaset 2015 plus, GBR: A30852-X-1105-B301-1-7619
kap06.fm5
29.10.99
Internal consultation and call transfer
During an external call you can
●
switch off the microphone and consult with another
person in the room,
●
transfer the outside call to an internal station user.
Consultation call
Operation with several handsets
If a number of handsets are in operation (➔ page 59), you
can consult with an internal user in the course of an exter-
nal call. The external subscriber is placed on hold
and cannot listen in (instead, he receives music on hold).
Terminating consultation/continuing external call
Operation in connection with a PBX
During an external call you can consult with another
station user connected to your telecommunications
system (PBX). In such cases note carefully the operating
instructions for the telecommunications system
Terminating consultation/continuing external call
Consultation hold and call transfer are only
possible
●
if several handsets are in operation (➔ page
59)
I
o
Press the internal key and then enter the number of the
required handset (1 to 6). You hear internal ringing tone.
The handset is called. The external call is held.
R
Terminate internal consultation. You are reconnected to
the external subscriber.
R
Initiate consultation. You hear dial tone. The external call
is held.
o
Enter the number of the required station. The user is
called.
R
Terminate internal consultation. You are reconnected to
the external subscriber.