Siemens 2015 - Manual (Page 5)

V
kap00.fm5 29.10.99 Gigaset 2015 plus, GBR: A30852-X1105-B401-1-7619
Overview: displays
Digits and characters on top line of handset display
Symbols on bottom line of handset display
Digits or characters which have been entered are
indicated on the top line of the display. The bottom line
contains symbols relating to the current operating state.
u Signal key R pressed.
P Manual dialling pause inserted (operation in conjunction
with a PBX).
z Memory is empty.
A Trunk code dialled (operation in conjunction with a PBX).
H Main trunk code dialled (operation in conjunction with a
PBX).
n Star key * pressed
- Square key # pressed.
c Volume of incoming speech, level 2.
cc
Volume of incoming speech, level 3
zzzz Protect mode
Indicates that the handset is in storage mode.
Numbers cannot be dialled in this mode.
Battery symbol. Flashes for approximately 5-10 minutes
before the batteries are completely discharged.
Battery is 33 % charged.
Battery is 66 % charged.
Battery is 100 % charged. Only trickle charging is carried
out on a cyclic basis.
ON symbol. Indicates that the handset is switched on.
Phone symbol, activated by pressing the c key. indi-
cates that there is a radio channel to the base station.
Indicates that the dialling method has been switched
over temporarily from dial pulsing to DTMF signalling.
Indicates that an external connection has been set up.
Indicates that an internal connection has been set up.
Indicates that the handset is locked.
A
f
N
b
E F G H
uPzAHn-8888888cc
A
j
i
g
f
N
b
E
F
G
H
A1