Siemens 2015 - Manual (Page 12)

Putting the equipment into operation - step by step
3
Gigaset 2015 plus, GBR: A30852-X-1105-B301-1-7619 kap02.fm5 29.10.99
4th step: inserting the batteries in the handset
The handset is powered by two batteries.
.
Hold the handset with the keypad downwards.
Insert the batteries in the battery compartment.
Slide the cover for the battery compartment into the
groove on the handset and close the compartment.
5th step: charging the batteries
To charge the batteries, place the handset in the handset
rest on the base station. The charging contacts on the
lower edge of the handset must touch the contacts in the
handset rest on the base station. It is immaterial whether
the keypad is facing up or down.
If you have inserted the handset correctly , an acknowl-
edgement tone is heard. The LED below the battery sym-
bol lights up on the base station.
Cover of battery
compartment
Battery compartment
and batteries
Make sure that the batteries have the correct
+/– polarity. The +/– markings on the batteries
must correspond to the +/– markings on the
label in the battery compartment.
If the batteries are aligned wrongly, the handset
will not function and the equipment is liable to
be damaged.
The batteries must be charged before you can
start making calls or settings.
We recommend initially charging the batteries
for approximately 16 hours without interruption
(over night, for example).
For further information on the use of the
batteries see ➔ page 67.