Siemens 2015 - Manual (Page 22)

Internal consultation and call transfer
13
Gigaset 2015 plus, GBR: A30852-X-1105-B301-1-7619 kap06.fm5 29.10.99
Call transfer
Operation with several handsets
If a number of handsets are in operation (➔ page 59), you
can transfer an external call to an internal station user.
Operation in connection with a PBX
If your telephone is connected to a telecommunications
system (PBX), you can transfer an external call to an inter-
nal station user. In such cases note carefully the operating
instructions for the telecommunications system.
I
o Press the internal key and then enter the number of the
required handset (1 to 6). You hear internal ringing tone.
The handset is called. The external call is held.
either
Wait until the internal party answers. Inform this user
about the outside call.
a Transfer the external call.
or
a Instead of waiting until the called party answers, transfer
the call directly.
Instead of pressing a you can replace your
handset in the charger unit.
If you transfer the external call directly and the
user fails to take the call within 30 seconds, you
are recalled.
If you transfer the external call directly and the
user is busy, you are recalled immediately.
If you take the recall, you are reconnected to the
external subscriber. A recall is taken in the same
way as any other type of call (➔ page 5).
R Initiate consultation. You hear dial tone. The external call
is held.
o Enter the number of the required station. The user is
called.
Wait until the internal party answers. Inform this user
about the outside call.
a Transfer the external call.