Smart Technologies SMART BOARD 4000I User Manual

Page 80

Text mode
Original mode

Appendix A: Disassembling and Reassembling the Cabinet

2. Tighten the four captive fasteners on the back corners of the interactive whiteboard

using the Phillips No. 2 screwdriver from the accessory kit. Tighten the two bottom
fasteners and then the top two. (You may need a step stool to reach the top two.)

NOTE: As you tighten the screws, maintain constant pressure on the screwdriver to
avoid damaging the screw heads.

3. Reconnect the MOD8 cable and the power cable to the communications hub by

reaching inside the side panel opening.

Corner

Captive

Fasteners

MOD8 Cable

Power Cable