Smart Technologies SMART BOARD 4000I - Manual (Page 40)

30 Setting Up the 4000i
Connecting an External Monitor or Projector (Optional)
You can send the video signal to another RGB video source, such as an external projector or
a monitor. To do this, connect a 15-pin male video cable (not provided) from the external
projector or monitor to the 15-pin female video Outputs port on the connection panel. This
connection is for RGB output only.
Figure 17: Connecting an External Projector
TIP
You may need to activate the projector’s video output by pressing a button on
the projector’s remote control.
Computer 2 Inputs
Outputs
S-Video
Printer / Network
Auxiliary
Inputs
S-Video
Video OUT
Video Cable
External Projector