Smart Technologies SMART BOARD 4000I - Manual (Page 75)

Appendix A: Disassembling and Reassembling the Cabinet 65
3. With one hand grasping the panel’s side handle and the other hand on top, pull the
side panel off the cabinet.
NOTE: This procedure requires two people.
1. Reach inside the side panel opening to disconnect the MOD8 cable and the power
cable at the back of the screen.
NOTE: The location of these connections (the communications hub) may be different
for your unit.
To remove the interactive screen
CAUTION Never touch the back of the screen or brush against it with your head. If you do
smudge this surface, lightly spray alcohol-free glass cleaner onto a soft cloth and
then lightly dab the affected area to remove the marks. Never apply isopropyl
alcohol, water or acetone, as these fluids will damage the diffusion coating and
permanently reduce the display quality.
Side Panel
Side Handle
MOD8 Cable
Power Cable