Siemens HiPath 4000 User Manual
Page 99
Appendix
91
The following appears
immediately after the
Talk key is pressed:
Connect.
No dial tone available;
no calls can be made.
Communication sys-
tem is being used by
other users.
Repeat call later.
The following,
for example, appears:
Base 1
Outgoing and incom-
ing calls and activation/
deactivation are not
possible.
Handset is blocked.
Remove the battery from
the handset and then re-
insert it. Proceed as
when loading batteries
for first time
(
The following appears:
Time exceeded
Maximum input time
was exceeded.
Avoid long pauses
between keystrokes.
The On-hook key was
not pressed.
Press the On-hook key.
The following appears:
Please try later
The communication
system is overloaded.
Wait and try again later.
The following appears:
Currently not acces-
sible
Function is currently
not available.
Wait and try again later.
No connection under
the phone number
dialled available.
Enter the phone number
correctly or call the
attendant console.
The following appears:
Not possible
or:
Incorrect input
or:
Nothing stored
Speed-dial number not
available, appointment
entered incorrectly,
entry blocked or not
allowed, prerequisite
not fulfilled
(for example, if there is
no second partner for
toggling), number
dialled was incomplete.
Correct your input,
select a permitted
option, enter the phone
number in full.
The following appears:
Not authorized
Blocked function was
called.
Apply to the relevant ser-
vice personnel for the
COS for the blocked
function.
The following appears:
Not allowed
Incorrect PIN was
entered.
Enter the correct PIN.
Error
Possible cause
Remedy