Selecting a base, Speed access to functions and phone numbers, Configuring speed access – Siemens HiPath 4000 User Manual

Page 88

Step by Step

Additional functions

Selecting a base

If your handset is registered at multiple bases, then you

can set a specific base or the base with the best recep-

tion as the base to be used. The handset then switches

automatically to this base.
You can change the base name that is displayed on the

handset at any time (Æ page 29).

Open the main menu of the handset.

F G

[

Select the menu item and confirm.

D E

[

Select the menu item and confirm.

[

Select the menu item and confirm.

[

Select the required base and confirm. The selected

base is ticked. If you select "Best Base", the handset

searches for the base that has the best reception.

a Press the On-hook key to end the process.

Speed access to functions and phone
numbers

You can program the left display key and the number

keys 0 and 2 to 9 with a phone number or function. You

can then dial the phone number or start the function

programmed by simply pressing the appropriate key.

Configuring speed access

either:

0 / 2 ... 9 Press the required number key briefly.

If this key is already programmed with a function, it

appears on the left display key. The number key can be

programmed with a new function.
Press the display key.

or:

0 / 2 ... 9 /

Press and hold down the required number key or the

left display key.

H/Set Set-

tings

Handset

Select Base

Base 1

Best Base

Set