Siemens HiPath 4000 - Manual (Page 60)

Step by Step
Conducting calls – enhanced functions
52
Variable call forwarding
For variable forwarding you can choose between six dif-
ferent call forwarding types:
• Variable forwarding (unconditional forwarding)
• Forwarding for internal
• Forwarding for external
• Forwarding on busy
• Forwarding after timeout
• Forwarding on busy/after timeout
The forwarding types are mutually exclusive except for
"forwarding for internal" and "forwarding for external".
You can program a forwarding destination for each of
the two exceptions and activate them both.
Example:
You have activated variable forwarding. If you now pro-
gram and thus activate forwarding after timeout, varia-
ble forwarding will be automatically deactivated and its
forwarding destination will be deleted.
Selecting a variable forwarding type
Select Destinations and Forwarding in the service
menu.
F
Call the system menu.
> < [
Select and confirm the basic service.
> < [
Select the menu item and confirm.
[
Confirm.
"Variable forwarding" will be offered first.
Output on first line.
> < [
Confirm to select the next forwarding type.
Output on first line.
> < [
Confirm to select the next forwarding type.
Output on first line.
> < [
Confirm to select the next variable forwarding type.
BASIC SERVICE
DESTINATIONS
FORWARD
FWD-VAR-ALL-
BOTH
NEXT
FWD-FIXED off
NEXT
FWD-VAR-ALL-INT
NEXT