Siemens HiPath 4000 User Manual

Page 53

Conducting calls – enhanced functions

Step by Step

Using a different telephone in the same
way as your own

You can log on to another telephone belonging to the

HiPath 4000 system via a personal identification

number or PIN (this includes telephones of networked

HiPath 4000 systems, for example, at other branches of

your company). At the other telephone you can then:

• make calls and assign the charges to cost centres,

• make calls and assign the charges to specific

projects,

• retrieve messages from your mailbox,

• set appointments.

Using an internal PIN, you can have your calls diverted

to a telephone in the office or department where you

will be for a temporary period (call forwarding - "follow

me").

Prerequisite: You have been assigned a PIN by System

Support. You require an internal PIN for calls within your

own HiPath 4000 system, while for calls involving other

HiPath 4000 systems in the integrated network you

require a network-wide PIN.

Call the system menu.

> <

[

Select and confirm the basic service.

either:

6 1 Enter the service code

(61 for PIN 1, 62 for PIN 2 etc.).

or:

> <

[

Select the menu item and confirm.

> <

[

Select the menu item and confirm.

If you have several PINs and wish to use another one,

select the other PIN.

then:

You are prompted to enter the PIN by the message

"Enter station no." or "Enter ID" on the display.

Entering the PIN for your own HiPath 4000 system:

Enter the internal PIN.

BASIC SERVICE

PIN / COS?

PIN 1?