Siemens HiPath 4000 - Manual (Page 41)

Conducting calls – enhanced functions
33
Step by Step
Setting the speakerphone volume
The volume can be set during a call (Æ page 19).
Voice dialling
With the voice dialling function, you can dial a number
simply by saying the partner’s name. You do not need
to manually dial a phone number. For this function, you
will need to record a voice pattern, in other words, your
voice saying the name will be saved in the handset.
You can save up to 29 voice patterns for telephone
directory entries.
Recording a voice pattern for an existing telephone
directory entry
You should record your voice pattern in a quiet environ-
ment. There should be about 25 cm between you and
the handset. The voice pattern can be up to 1.5 seconds
long.
D
Open the handset’s phonebook.
D E
Select the required entry.
©
or
G
Open the handset’s phonebook menu.
D E [
Select the menu item and confirm.
Say the name when the relevant prompt is displayed.
Repeat the name after being prompted again. The voice
pattern will be saved automatically.
Note:
If you wish to replace the handset in the charg-
ing shell during a call, for example, because the
battery is flat, hold down the Speakerphone key
to prevent the call from being cleared down.
Note:
If you perform voice dialling mainly over a head-
set, we recommend recording the voice pattern
via the headset.
Record Name
...