beautypg.com

Changing the name of the base station – Siemens HiPath 4000 User Manual

Page 37

background image

Setting the handset

29

Step by Step

D E

[

Select the menu item and confirm.

[

Activate (or deactivate) night mode.
Night mode is activated.

The night mode function is active when a checkmark

appears beside the corresponding menu item and can

be deactivated by selecting the menu item once more.

Changing the name of the base station

You can change the base station name that is displayed

in idle status. The handset must be registered at the

corresponding base.

©

or

G

Open the main menu of the handset.

D E

[

Select the menu item and confirm.

D E

[

Select the menu item and confirm.

D E

[

Select the menu item and confirm.

D E

[

Select the menu item and confirm.
The selected base is activated. The activated base is

ticked. It can be deactivated by selecting another base.
Change the settings.

Edit Name:

X

Delete text.

o

and possibly

X

Enter the required text and correct individual characters

as necessary using the "Delete" display key.
Save the settings.

a Press the On-hook key to end the process.

aa Press the On-hook key twice to turn the handset off and

back on.

The new base station name is now displayed in idle sta-

tus. This name is replaced by the user’s name or the

phone number dialled when you call a user. The name

of the base station only reappears after the handset has

been switched off and back on again.

Night Mode

H/Set Settings

Handset

Select Base

Change

Save