Siemens HiPath 4000 - Manual (Page 10)

Step by Step
Conducting calls – the basic functions
2
Activating/deactivating the handset
a Press the On-hook key until the activation or deactiva-
tion is confirmed by a crescendo tone sequence.
PIN
If the default PIN has not been changed (0000), the
handset is ready for operation as soon as it is switched
on. If a PIN was set, it must be entered before the hand-
set can be operated.
Displaying the connection quality
The strength of the incoming signal is displayed by the
"receive field strength" icon in on or message status:
The radio range is different indoors and outdoors
(Æ page 94). Please consult your system administrator
in the event of range problems.
Charging batteries
The handset charges when sitting in the charging shell,
even when deactivated. The charging status is shown
on the display.
If the handset deactivates because the batteries are
flat, it automatically reactivates and is ready for opera-
tion as soon as you place it in the charging shell. The
charging operation starts. If a PIN was set, it must be
entered first to allow charging to start.
Language
If your preferred language for the display texts is not
set, you can set this yourself (Æ page 17).
|
No receive field strength
Ò
Low receive field strength
Ñ
50% receive field strength
Ð
100% receive field strength