Siemens HiPath 4000 - Manual (Page 61)

Conducting calls – enhanced functions
53
Step by Step
Output on first line.
> < [
Confirm to select the next variable forwarding type.
or
> <
To edit the current variable forwarding type, select the
required command.
Programming a forwarding destination
F
Open the System Menu.
> < [
Select and confirm the basic service.
> < [
Select the menu item and confirm.
[
Confirm. The display shows "variable forwarding".
[
Confirm. The display shows "FWD-FIXED off".
[
Confirm. The display shows "Forwarding for internal".
> < [
Select and confirm.
o
Enter the phone number for the forwarding destination.
Any destination previously programmed will be over-
written.
[
Confirm when the complete number has been entered.
To select a different forwarding type, proceed as
described on Æ page 52.
If variable forwarding was previously programmed and
activated, it is deactivated and the forwarding destina-
tion is deleted (for exception, see Æ page 52). Fixed for-
warding is deactivated.
Deleting a forwarding destination
A variable forwarding destination is automatically
deleted when the forwarding type is deactivated.
Activating variable forwarding
Variable forwarding is automatically activated when the
forwarding destination is programmed.
FWD-VAR-ALL-EXT
NEXT
BASIC SERVICE
DESTINATIONS
FORWARD
NEXT
NEXT
ENTER DESTIN.:
SAVE