Samsung SMG-3200 - Manual (Page 98)

5-22
Chapter 5
CLI (Command Line Interface)
2. Input the number of the dial method to be changed, and press [Enter].
Configuration Item Number:
3. Specify a value referring to the following table, and press [Enter].
No No No No Item Item Item Item Description Description Description Description
0 Dial Type Selection
Selects a trunk digit transmission type.
0. MFC : Multi-Frequency (DTMF) type
1. PULSE : Pulse type
2. R2MFC : R2MFC type
1
DTMF Holding Time
(1 ~ 99) Specifies MFC digit holding time. Typed
number x 100msec is the holding time.
2 Calling Number Request
Sets whether caller’s number identification is
to be requested (ON) or not (OFF) to the
other party.
3 Calling Number Response
Sets whether you accept (ON) or not (OFF)
the other party’s request for caller’s number
identification.
4 Called Status Request
Sets whether you request (ON) or not (OFF)
the other party for call status.
5 Called Status Response
Sets whether you accept (ON) or not (OFF)
the caller’s request for call status.
6
Calling Extension
Response
Must be specified when the SMG-3200 is
used in Standalone mode, but it is currently
not in service.
Number 0 and 1 are used in MFC type and the rest are used in
R2MFC type.