Samsung SMG-3200 - Manual (Page 124)

5-48
Chapter 5
CLI (Command Line Interface)
(Continued)
No Item Description
7
H.245
tunneling
H.245 signalling does not need any additional channel.
It is possible to use the Q.931 signalling channel together.
8
DIL
Number When a dial digit is not included in incoming calls on IP
network, specifies a number to determine a call.
9
SNMP
Server IP
When the SMG-3200 is connected with network
management equipment with SNMP protocol, it inputs IP
address of the network management equipment.
10
Signaling
Port
Indicates the port number in IP for H.323 signaling. It
also sets the range of port numbers allowed by firewall
equipment. When a specific port is specified, up to the
number of VoIP channels x 4 from the specific port, can
be used. This function will be available soon.
11
Status
Monitori
ng Port Sets the range of port numbers for exchange of system
status information between the SMG-3200. The specified
port plus (specified port +1) can be used.
12
WCS
Port Specifies the communication port connecting Samsung’s
Web Call Service terminal.
13
SIGK
Access
Port Specifies the communication port connecting Samsung’s
Internet Gatekeeper. The specified port plus (specified
port +1) can be used.
14
Status
Monitori
ng Period Sets the status monitoring period between Samsung’s
VoIP Gateways. It is only to be used when the SMG-3200
is connected to Samsung’s VoIP Gateway.
15
Max. Fax
Service
Count
Sets the max allowable number of Internet fax channels
with the SMG-3200. (Max. 8 no)
16
No
Answer
Waiting
Time (sec)
Sets the max waiting time to wait when the party does not
answer after call connection.