Samsung SMG-3200 - Manual (Page 116)

5-40
Chapter 5
CLI (Command Line Interface)
2. Type ‘1’ to block or ‘2’ to unblock, and press [Enter].
Select Block or UnBlock (1: Block, 2: UnBlock) ->
3. Input the slot number for the port specified to be unblocked, and press [Enter].
Blocking Slot Number: (0: VoIP, 1: USL1, 2: USL2, 3: D-TRK)
4. Input the port number, and press [Enter].
Blocking Port No. of VoIP Slot (Range: 0 ~ 0x1F) [ . :Exit ] ->
5. You can continue with other ports by typing in the corresponding port number
and pressing [Enter].
Blocking Port No. of VoIP Slot (Range: 0 ~ 0x1F) [ . :Exit ] ->
6. To exit, type ‘.’, and press [Enter]. You will return to the
Menu> screen.