Samsung SMG-3200 - Manual (Page 70)

4-16
Chapter 4
Configuring the System
3. Input the number of desired PCM type and press [Enter].
Configuration Item Number: 0
PCM Type (0:U_LAW, 1:A_LAW): A_LAW -> 1
4. To close current screen, type ‘.’ and press [Enter].
Configuration Item Number: .
5. After returning to the screen, type ‘16’ and press [Enter].
<<<<< PSTN Configuration Menu >>>>>
[0] Gateway Operation Mode
[1] PSTN Rerouting Insert Digit
[2] PCM Method
[3] Dial Method
[4] SLC Signal
[5] Trunk Signal
[6] Call Control Method
[7] Ring Cadence
[8] System Tone Cadence
[9] CO Tone Cadence
[10] Gain Control
[11] Diagnosis
[12] MMC Port Block/UnBlock
[13] Display Slot Configuration
[14] Display Port Status
[15] Save & Exit
[16] Exit
Select ? 16
6. Message asking if you want to save the changed configuration in flash memory is displayed.
Type ‘y’ and press [Enter].
# PSTN Configuration has changed. Save? (y: Yes, n: No) -> y
7. Changed data is saved in flash memory, and you are returned to the initial screen of the
SMG-3200 CLI interface.