beautypg.com

Configuring the system operation mode, Setting up gateway operation mode – Samsung SMG-3200 User Manual

Page 65

background image

4-11

8. Configured network parameters and message asking you whether to restart system is displayed

as follows. After confirming the parameters type ‘y’ and press [Enter].

Good

>>> IP Address = 165.213.81.230

>>> Gateway = 165.213.81.1

>>> Subnet Mask = 255.255.255.0

>>> TOS = 0

# System Configuration has changed. Restart? (y: Now, n: Later) -> y

9. Log in again on CLI after the system is restarted.

Configuring the System Operation Mode

You have to configure gateway operation mode and PCM type, after TCP/IP configuration.
This section describes procedures for system operation configuration.

Setting up Gateway Operation Mode

SMG-3200 gateway operates in either of the following 2 operation modes.

Tandem Gateway : SMG-3200 communicates with PBX or KTS over PSTN trunk without

subscriber phone connection.

Standalone Gateway : SMG-3200 communicates with analog telephone with PSTN trunk

with subscriber phone connection through SLC port.

Configure gateway operation mode of SMG-3200 referring to the following directions.