Samsung SMG-3200 - Manual (Page 154)

5-78
Chapter 5
CLI (Command Line Interface)
dbfilehelp
Function This command displays the CLI commands related to system information Backup
and save. The DB Down/Upload function is used to save system information in a
file, or transfer the information saved in a file to the system. It is used to apply
information on one system to several other systems, or to back up system
information and recover the system from system failures. The system information
file is an ASCII file.
Procedure At the SMG-3200 prompt, type 'dbfilehelp,' and press [Enter]. Then the following
DB-related CLI command list is displayed on the screen.
SMG3200:165.213.81.230> dbfilehelp
dbfilehelp Print This List
getdefdb "filename" Generate File with Default DB Value
getdb "filename" Generate File from Current DB Value
putdb "filename" Update System DB from File
dump "filename" Print DB File to Console
load "filename" Write DB File from Console
value = 2 = 0x2
SMG3200:165.213.81.230>