Samsung SMG-3200 - Manual (Page 86)

5-10
Chapter 5
CLI (Command Line Interface)
2. To upgrade the system software, type ‘y’, and press [Enter].
Upgrade This System? (y: Yes, n: No) -> y
3. Select an upgrade method and press [Enter].
Upgrade Method (1: TFTP, 2: FTP) ->
4. When TFTP is selected, input the IP address of the TFTP server. When FTP is
selected.
TFTP Server Address (dot form): 165.213.81.10 ->
5. Input the number of files in the DSP Chip program for VoIP. When none of the
DSP Chip programs for VoIP are to be upgraded, type ‘0’ and press [Enter].
DSP Package File Count: 2 ->
6. Input the number of system operation program files. When none of the system
operation programs are to be upgraded, type ‘0’ and press [Enter].
Main Package File Count: 28 ->
7. A message asking you whether to restart the system will be displayed as
follows. To restart immediately, type ‘y’ or type ‘n’ otherwise and press
[Enter].
# System Configuration has changed. Restart? (y: Now, n: Later) ->
The number of DSP files or system operation files can be
changed according to the version of system program.