Samsung SMG-3200 - Manual (Page 102)

5-26
Chapter 5
CLI (Command Line Interface)
(Continued)
No No No No Item Item Item Item Description Description Description Description
4 T1 Signal Mode
Sets the transmission frame format during T1
Signal mode.
•
SF (Superframing Format): Sends a superframe
made of 12 frames.
•
ESF (BOM) (Extended Superframing Format by
BOM (Bit Oriented Message Mode)): sends a
extended superframe made of 24 frames.
•
ESF (HDLC) (Extended Superframing Format
by HDLC (High Level Data Link Contro)): sends
a extended superframe made of 24 frames.
5 E1 CRC4
Sets the mode to encode the CRC bit in case of
E1 signal mode.
•
Disable: sends the CRC bit to synchronization
signal frame without encoding
•
Enable: sends the CRC bit to synchronization
signal frame with encoding
6 PRI Type
SMG-3200 supports a PRI protocol of EU and
KOR type in the current version.
7 PRI Channel Mode
Sets the PRI channel mode.
•
Exclusive Mode: sets the channel previously
and makes a call.
•
Preferred Mode: makes a call by using the
channel the counterparty decides.
* In Network (Master) Mode, only Exclusive mode is used.
8 PRI Dial Mode
Sets the way of transferring messages during PRI
dial mode.
•
Enbloc Mode: transfers the messages at a time.
•
OverLap Mode: transfers each message
separately.
9 Seize Time
The time elapsed for a seizure signal being
maintained until hook off is detected. Typed
number x 10msec is the actual seize time.
10 Release Time
The time elapsed for a release signal being
maintained until trunk connection is off. Typed
number x 100msec is the actual release time.