IBM 1800409-001A - Manual (Page 62)

Installing the Waste Toner Pack
NOTE: For information on replacing a used waste toner pack, see
c ha pte r 6 , “C onsumabl e s a n d P re vent at i v e
Maintenance.”
To install the waste toner pack
1. Remove the waste toner pack from its protective bag.
2. Follow the instructions accompanying the pack for
assembling it, being careful not to puncture the bag.
3. Open the waste toner door by pushing the cover on the
top-right corner (fig. 2.22).
Fig. 2.22 Open the Waste Toner Door (side view)
Chapter 2
2 - 3 0 I n i t i a l P r i n t e r S e t u p