IBM 1800409-001A - Manual (Page 223)

3. Insert the wire cleaner into the recess on the pre-charger unit,
and slide the cleaner back and forth as shown in figure 6.15.
4. Clean the inside corners of the pre-charger unit with cotton
swabs.
5. Making sure the pre-charger unit aligns on the runners inside
the printer, slide it back into the printer.
6. Reinstall the waste toner pack, and close the waste toner
cover.
Fig. 6.15 Clean the Pre-Charger Unit
Chapter 6
C o n s u m a b l e s a n d P r e v e n t a t i v e M a i n t e n a n c e 6 - 3 3