IBM 1800409-001A - Manual (Page 336)

Clearing Outer Jams
When the control panel message window displays OUTER JAM,
media has jammed leaving the paper exit unit. To clear this jam,
use the following procedure:
1. Open the back cover by pressing the top-right corner to release
the spring latch (fig. 9.9).
2. Open the transfer unit by grasping the green handle in the
center and pulling it toward you and down (fig. 9.9).
WARNING! The fuser unit is hot! Do not remove a jam in this
area until the fuser unit cools.
ACHTUNG! Die Fixiereinheit wird sehr heiß! Bitte achten Sie
darauf, daß sie diese einige Zeit abkühlen lassen, bevor Sie
einen Papierstau beseitigen.
Fig. 9.9 Open the Transfer Unit
Chapter 9
9 - 1 4 T r o u b l e s h o o t i n g