IBM 1800409-001A - Manual (Page 231)

7. Locate the two manual-feed belts at the top of the cassette slot
(fig. 6.21).
8. Use the damp cloth the wipe the belts. Advance the belts so
that the entire surface is cleaned.
9. Slide the manual-feed platform back into place. Push it back
into the printer until it is secure.
10. If you have the optional 250-sheet feeder installed, repeat
steps 2 through 4 for that cassette.
11. Replace the media cassette.
12. Replace the cables you removed in step 1 and replace the
power cord.
Cleaning the Exterior of Your Printer
At times it may be necessary to clean the outside of your printer.
Be sure read all of this section before cleaning your printer.
WARNING! Remove the printer’s power cord from the power
outlet before cleaning or an injury may result.
ACHTUNG! Ziehen Sie den Netzstecker aus der Steckdose
bevor Sie den Drucker reinigen.
To protect your printer and to maintain its appearance, make sure
you use the following guidelines:
■ Use only mild household cleaning solutions that do not
contain alcohol or solvents.
■ Use only a dry or slightly damp, lint-free cloth. Never use
sharp or rough implements, such as wire or plastic cleaning
pads.
Chapter 6
C o n s u m a b l e s a n d P r e v e n t a t i v e M a i n t e n a n c e 6 - 4 1