IBM 1800409-001A - Manual (Page 332)

2. Open the transfer unit by grasping it in the center by the green
handle and pulling it toward you and down (fig. 9.5).
NOTE: To avoid damage to the rollers, always remove
jammed media gently. Also, toner images on the media aren’t
fused (set), which means toner is still loose. Avoid getting
toner on your hands and clothes while removing the jammed
media. If you accidentally get toner on your hands or clothes,
lightly dust off as much as possible. If some toner remains,
use cool, not hot water, to rinse it off your hands or washable
clothing.
Fig. 9.5 Open the Transfer Unit
Chapter 9
9 - 1 0 T r o u b l e s h o o t i n g