beautypg.com

Cleaning the pre-charger unit – IBM 1800409-001A User Manual

Page 221

background image

13. Push the green end-handle down to lock the cartridge in place.

14. Close the manual feed tray.

Cleaning the Pre-Charger Unit

Clean the pre-charger unit whenever the print quality diminishes.
To clean this unit you need several cotton cloths and swabs, and
the wire cleaner located in the OPC belt tray (see figure 6.11 for
location).

To clean the pre-charger unit

1.

Remove the waste toner pack. (See “Replacing the Waste
Toner Pack” in this chapter.) Then, set it aside on a surface
that toner residue can’t hurt, such as on a piece of paper.

WARNING!

The toner is a highly combustible powder; never

burn it. Also, avoid inhaling loose toner or getting it around
your eyes; it can cause respiratory problems and eye irritation.

ACHTUNG!

Bei dem Toner handelt es sich um ein gefähr-

liches und leicht entzündliches Pulver; es darf deshalb niemals
mit offenem Feuer in Berührung kommen. Einatmen oder
Berührung mit Haut und Augen ist ebenfalls zu vermeiden, da
dies zu Beeinträchtigungen der Atemwege, Hautoder Augen-
reizungen führen könnte.

Chapter 6

C o n s u m a b l e s a n d P r e v e n t a t i v e M a i n t e n a n c e

6 - 3 1