Icom IC-2800H - Manual (Page 85)

HM-90 WIRELESS MICROPHONE
Infrared, full remote control microphone. Wired remote control is also
possible.
EX-1759 INFRARED RECEIVER
Used to receive control signals from the HM-90.
EX-1513 INFRARED SUB RECEIVER
Used with the EX-1759 to extend the controllable area.
HM-98 REMOTE CONTROL MICROPHONE
Wired remote control microphone with key backlight. Same as sup-
plied with some versions.
HM-118 HAND MICROPHONE
HM-118T/TA DTMF MICROPHONE
HM-95 DTMF MICROPHONE
HM-97 HAND MICROPHONE (with tone call)
HS-62 FLEXIBLE MOBILE MICROPHONE + HS-15SB SWITCH
BOX + OPC-589 ADAPTER CABLE
For all-around mobile operation.
MB-17A MOBILE MOUNTING BRACKET
One-touch bracket. Transceiver body easily attached and removed.
MB-65 MOUNTING BASE
Mounts the controller unit in a convenient location. Adjustable angle
and direction for optimum positioning.
MB-73 CONTROLLER BRACKET
Mounts the controller to a wall or flat surface. Same as supplied.
SP-10 EXTERNAL SPEAKER
For all-around mobile operation.
CS-2800 CLONING SOFTWARE + OPC-478 CLONING CABLE
Provides quick and easy programming of items, including memory
channels, memory names and set mode contents for local repeater
frequencies, etc. via a PC.
OPC-346/OPC-347 DC POWER CABLES (20 A capacity)
OPC-346: 3.0 m (9.8 ft); OPC-347: 7.0 m (23 ft)
OPC-440/OPC-647 MICROPHONE EXTENSION CABLES
OPC-440: 5.0 m (16.4 ft); OPC-647: 2.5 m (8.2 ft)
OPC-872 CONTROLLER EXTENSION CABLE (3.5 m; 11.5 ft)
81
18
OPTIONS