Icom IC-2800H - Manual (Page 12)

8
2
PANEL DESCRIPTION
■ Main unit
q MICROPHONE CONNECTOR [MIC]
Connects the supplied microphone.
w CONTROLLER CONNECTOR [CONTROLLER] (p. 16)
Connects the controller unit with the supplied cable.
e
DATA CONNECTOR [DATA] (p. 70)
Connects a TNC (Terminal Node Controller), etc. for data
communications.
• See the information at right for details.
r 144 MHz SPEAKER CONNECTOR [144 MHz SP]
Connects an 8
Ω
speaker, if desired.
t 430(440) MHz SPEAKER CONNECTOR
[430(440) MHz SP]
Connects an 8
Ω
speaker, if desired.
DATA
MIC CONTROLLER
q w e
t
r
y
u
q +8 V DC output (Max. 10 mA)
w Frequency up/down
e HM-90/98 control input
r PTT
t Microphone ground
y Microphone input
u Ground
i No connection
➀ ➇
With no exter-
nal speakers
[144MHz SP]
only
[430(440) MHz
SP] only
2 external
speakers
VHF band audio UHF band audio
Connected
speaker
Internal speaker (mixed audio)
External speaker (mixed audio)
Internal speaker
External speaker via
[144MHz SP] External speaker via
[430(440) MHz SP]
External speaker