Icom IC-2800H - Manual (Page 34)

30
6
REPEATER OPERATION
■ Offset frequency
When communicating through a repeater, the transmit fre-
quency is shifted from the receive frequency by an amount
determined by the offset frequency.
q Select the mode/channel you wish to set the offset fre-
quency to, such as VFO mode or memory/call channel.
w Push the desired band’s [ (MAIN) EDIT] for 2 sec. to enter the
edit screen.
• Push [CHG/L] if [(MAIN) EDIT] is not displayed.
e Push [ Y ] or [ Z ] to select the ‘OW’ item.
• Left-hand tuning dial can also select the item.
r Rotate the right-hand tuning dial to select the desired fre-
quency.
• The offset frequency is set temporarily. Push [MW] for 2 sec. to
store the offset frequency permanently.
• Push [MHz] to toggle the 1 MHz tuning step ON and OFF.
• The color of the frequency indication changes when the setting is
different from the memory or call channel contents.
t If you want to set other channels, push [CH] then rotate the
right-hand tuning dial. Repeat
e and r to select the de-
sired frequency.
y Push [ ï ] to exit the edit screen.
ï
Y
Z
CH
SKIP
MW
MEMORY E D I T
( T S=1 2 . 5 k)
Name ICOM2800
R - Tone
C - Tone
OW 1 2 3 . 0
8 8 . 5
0.600
145.320
12
MHz