Icom IC-2800H - Manual (Page 60)

■ DTMF speed
The rate at which DTMF memories send individual DTMF
characters can be set to accommodate operating needs.
q Push [DTMF] for 2 sec. to select the DTMF memory
screen.
• Push [CHG/L] if [DTMF] is not displayed.
w Push [TIME] one or more times to select the desired
speed as shown in the table below.
e Push [ ï ] to exit the DTMF memory screen.
DISPLAY INTERVAL SPEED
100ms 100 msec. 5.0 cps
200ms 200 msec. 2.5 cps
300ms 300 msec. 1.6 cps
500ms 500 msec. 1.0 cps
56
13
DTMF MEMORY
cps=characters/sec.
DTMF
D0
D1
D2
D3
0123456
0123456789AB
Tx Time 100ms TIME
EDIT