Icom IC-2800H - Manual (Page 45)

41
8
SCRATCH PAD MEMORY
q Select the desired band with [BAND].
w Push [ (MR) CALL] for 2 sec. to select the se-
lected band’s call channel.
e Push [ Y ] one or more times to select a duplex
scratch pad memory; push [ Z ] one or more
times to select a simplex scratch pad memory.
r Push [MR] or [VFO] to exit the scratch pad
memory.
■ Transferring scratch pad
memory contents
Transferring scratch pad memory contents to the VFO is done
similarly to transferring memory/call contents.
q Push [M/C] to select the call channel.
• Push [CHG/L] if [M/C] is not displayed.
• “C” appears when the call channel is selected.
w Rotate the desired band’s tuning dial to select the desired
scratch pad memory.
• One of “L1” to “L5” or “R1” to “R5” appears.
e Push the desired band’s [S.MW] momentarily to indicate
memory channels.
• Push [S.MW] for 2 sec. to transfer the scratch pad memory to
VFO.
r Rotate the desired band’s tuning dial to select the desired
memory channel.
t Push [ (S.MW) MW] for 2 sec. to transfer.
q Select the desired band with [BAND].
w Push [ (MR) CALL] for 2 sec. to select the se-
lected band’s call channel.
e Push [ Y ] one or more times to select a duplex
scratch pad memory; push [ Z ] one or more
times to select a simplex scratch pad memory
to be transferred.
r Push [FUNC] then [ E MW] momentarily to indi-
cate memory channels.
• Push [MW] for 2 sec. to transfer the scratch pad
memory to VFO.
t Push [ Y ] or [ Z ] to select the desired channel.
• Call channel (C), VFO (- -) and scan edges (1A –
3B), as well as regular memory channels, can be
transferred in this way.
y Push [FUNC] then [ E MW] for 2 sec. to trans-
fer.
MW
A
CALL