Icom IC-2800H - Manual (Page 72)

68
15
OTHER FUNCTIONS
■ HM-97/118 [UP]/[DN] keys
Switches on the transceiver’s front panel can be assigned to
the HM-97/118 [UP] and [DN] keys. The following can be as-
signed:
V/U MAIN : [MAIN (SCP)] V/U V/MHz : [V/M H (TS)]
V/U M/C : [M/C (SCN)] V/U MONI : [MONI (LOW)]
V/U EDIT : [MAIN (EDIT)] V/U TONE : [TON (DUP)]
V/U MW : [S.MW (MW)] DTMF : [DTMF]
DISP : [DISP (SET)] Up : Microphone’s up
Dn : Microphone’s down
q Push [ (DISP) SET] for 2 sec. to enter set mode.
• Push [CHG/L] if [(DISP) SET] is not displayed.
w Push [ Y ] or [ Z ] to select the ‘HM-118 Up’ or ‘Dn’ item.
• Left-hand tuning dial can also
select the item.
e Rotate the right-hand tuning
dial to select the desired
function.
r Push [ ï ] to exit set mode.
q Push [ F SET] to enter set mode.
w Push [ F SET] or [ G ENT] to select the ‘HM-118
Up’ or ‘Dn’ item.
e Push [ Y ] or [ Z ] to select the desired function.
r Push [ E CLR] to exit set mode.
[UP] or [DN] key assignment is available for the micro-
phones which have [UP]/[DN] switches except the HM-98.
■ Display contrast
The contrast of the LCD can be adjusted from 0% to 100% in
3 or 4% steps. Adjust contrast to suit lighting conditions and
personal preferences.
q Push [DISP] to enter display set mode.
• Push [CHG/L] if [DISP] is not displayed.
w Push [ Y ] to select the ‘Contrast’ item.
• Left-hand tuning dial can also select the item.
e Rotate the right-hand tuning dial to select the desired con-
trast.
r Push [ ï ] to exit display set mode.
ï Y
Z
SET
Memory Name
OFF
VHF M/C
UHF M/C
Up
Dn
HM-98 F-1
HM-98 F-2
HM-118 Up
HM-118 Dn
ï Y
Z
DISPLAY
C o n t r a s t
50%
38%
B r i g h t
M y C a l l
Display Type
A
SET
B