Icom IC-2800H - Manual (Page 53)

49
11
PRIORITY WATCH
y Push [ (MEM ) PRIO] for 2 sec. to start the watch.
• The transceiver checks the memory or call channel frequency
every 5 sec.
• The watch resumes according to the selected scan resume con-
dition. (p. 46)
• “PRIO” and decimal point blinks while receiving a signal on a
watch channel.
u Push [ (MEM ) PRIO] while the display shows the VFO fre-
quency to stop the watch.
q Select the desired band with [BAND].
w Select VFO mode with [VFO].
e Set an operating frequency.
r Push [SQL Y ] or [SQL Z ] to set the squelch to
the threshold point.
t Set the watching channel(s).
For memory channel watch:
Select the desired memory channel.
• Select memory mode with [MR]; select the memory
channel to be watched with [ Y ]/[ Z ].
For memory scan watch:
Start the memory scan.
• Select memory mode with [MR]; push [ w SCAN]
momentarily or [ Y ]/[ Z ] for 2 sec. to start memory
scan.
For call channel watch:
Select the call channel by pushing [
(MR) CALL]
for 2 sec.
y Push [ e PRIO] to start the watch.
• The transceiver checks the memory or call channel
frequency every 5 sec.
• The watch resumes according to the selected scan
resume condition. (p. 46)
• “PRIO” and decimal point blinks while receiving a
signal on a watch channel.
u Push [ e PRIO] or [ E CLR] while the display
shows the VFO frequency to stop the watch.
PRIO
M - L
SCAN
Resume 15s
145.320
12
MAIN
43
3.000
12
í
MAIN
PRIO
MEM
TON
Res
SEL
SCP
MAIN
TS
V/M H
SCN
M/C
LOW
MONI
M I D - L O
M RX
PRIO
3