Icom IC-2800H - Manual (Page 39)

35
7
MEMORY/CALL CHANNELS
■ Transferring memory
contents to another memory
via the microphone
The HM-98 microphone can also be used to trans-
fer memory channels.
q Select the desired band with [BAND].
w Select memory mode with [MR].
e Set the desired memory channel to be transferred with [ Y ]
or [ Z ].
r Push [FUNC] then [ E MW] momentarily to indicate mem-
ory channels.
• Push [MW] for 2 sec. to transfer the memory channel contents to
VFO.
t Push [ Y ] or [ Z ] to select the desired channel.
• Call channel (C), VFO (- -) and scan edges (1A – 3B), as well as
regular memory channels, can be transferred in this way.
y Push [FUNC] then [ E MW] for 2 sec. to transfer.
MW
A