Icom IC-2800H - Manual (Page 26)

■ Using the keypad
The frequency can be directly set via numeral keys
on the HM-98 microphone.
q Push [BAND] to select the desired operating band.
w Push [VFO] to select VFO mode, if necessary.
e Push [ENT] to activate the keypad for digit input.
r Push 6 keys to input a frequency.
• When a digit is mistakenly input, push [ENT] to clear the input,
then repeat input from the 1st digit.
• Pushing [CLR] clears input digits and retrieves the frequency.
t Push [ Y ] or [ Z ] to make adjustments below the 10 kHz
digit, if desired.
22
4
FREQUENCY SETTING
ENT
C
[EXAMPLE]: Setting the frequency to 145.3625 MHz.
MAIN
12
14
5.000
M I D - L O
SCP
MAIN
TS
V/M H
SCP
MAIN
TS
V/M H
MAIN
12
5 .
M I D - L O
SCP
MAIN
TS
V/M H
SCP
MAIN
TS
V/M H
MAIN
12
14
5.36
M I D - L O
SCP
MAIN
TS
V/M H
SCP
MAIN
TS
V/M H
MAIN
12
14
5.362
M I D - L O
SCP
MAIN
TS
V/M H
SCP
MAIN
TS
V/M H
5
C ENT BAND VFO 3 PRIO 5 MID 1 MONI 4 HIGH 6 LOW 2 SCAN