Multi-Tech Systems MMCModem GPRS (MTMMC-G) - Manual (Page 70)

Chapter 9 – Short Messages Commands
Multi-Tech Systems, Inc. Wireless GSM/GPRS AT Commands (Document Number S000293I) 70
Send Message +CMGS
Description: The
This command can be aborted using the character when entering text. In PDU mode, only
hexadecimal characters are used (‘0’…’9’,’A’…’F’).
Values: See the Parameters Definition list at the beginning this chapter.
Syntax: Command syntax in text mode:
AT+CMGS= [ , ]
Text is entered:
Command syntax in PDU mode:
AT+CMGS=
PDU is entered:
Command Syntax: AT+CMGS
Command Possible responses
AT+CMGS=”+33146290800”
------------------------------------------------
Please call me soon, Fred.
Note: Send a message in text mode
------------------------------------------------ >
---------------------------------------
---------------------------------------
+CMGS:
OK
Note: Successful transmission
AT+CMGS=
Note: Send a message in PDU mode (1/3)
--------------------------------------------------------
Note: Enter message in PDU mode (2/3)
--------------------------------------------------------
Note: End the message (3/3)
>
---------------------------------------
-----------------------------------------
+CMGS:
OK
Note: Successful transmission
The message reference is returned to the application and allocated by the product. This number
begins with 0, is incremented by one for each outgoing message (successes and failures), and is cyclic
on one byte (0 follows 255).
Note: T his number is not a storage number. Outgoing messages are not stored.