Multi-Tech Systems MMCModem GPRS (MTMMC-G) User Manual
Page 154

Chapter 15 – GPRS Commands
Multi-Tech Systems, Inc. Wireless GSM/GPRS AT Commands (Document Number S000293I)
154
Quality of Service Profile Minimum Acceptable
+CGQMIN
Description:
This command allows the DTE to specify a minimum acceptable profile which is checked by the modem
against the negotiated profile returned in the Activate PDP Context Accept message.
The set command specifies a profile for the context identified by the local context identification
parameter,
+CGDCONT command, the
+CGQMIN command is effectively an extension to the +CGDCONT command. The QoS profile consists
of a number of parameters, each of which may be set to a separate value.
A special form of the set command, +CGQMIN=
context number
profile.
The read command returns the current settings1 for each defined context.
The test command returns values supported as a compound value. If the modem supports several PDP
types, the parameter value ranges for each PDP type are returned on a separate line.
Values:
a numeric parameter which specifies a particular PDP context .
Note:
If a value is omitted for a particular class then this class is not checked.
Syntax:
Command Syntax: AT+CGQMIN
Command
Possible Response(s)
AT+CGQMIN=[
[,
[,
OK
ERROR
AT+CGQMIN?
+CGQMIN:
[
[…]]
OK
AT+CGQMIN=?
+CGQMIN:
supported
of supported
[
supported
of supported
[…]]
OK
AT+CGQMIN=1,1,4,5,2,31
OK
AT+CGQMIN=? +CGQMIN:
“IP”,(1-3),(1-4),(1-5),(1-9),(1-31)
+CGQMIN: “PPP”,(1-3),(1-4),(1-5),(1-9),(1-31)
OK
AT+CGQMIN? +CGQMIN=?
1,1,4,5,2,14
OK