Multi-Tech Systems MMCModem GPRS (MTMMC-G) - Manual (Page 189)

Appendix C – Structure of the Terminal Profile
Multi-Tech Systems, Inc. Wireless GSM/GPRS AT Commands (Document Number S000293I) 189
Fifth byte (Event driven information):
b8 b7 b6 b5 b4 b3 b2 b1
Proactive SIM: SET UP EVENT LIST Set by product to 1
Event: MT call Set by product to 1
Event: Call connected Set by product to 1
Event: Call disconnected Set by product to 1
Event: Location status Set by product to 1
Event: User activity User choice
Event: Idle screen available User choice
Event: Card reader status Set by product to 0
Sixth byte: (reserved for Event driven information extensions)
b8 b7 b6 b5 b4 b3 b2 b1
RFU, bit = 0
Seventh byte (Multiple card proactive commands) for class "a"
b8 b7 b6 b5 b4 b3 b2 b1
Proactive SIM: POWER ON CARD Set by product to 0
Proactive SIM: POWER OFF CARD Set by product to 0
Proactive SIM: PERFORM CARD APDU Set by product to 0
Proactive SIM: GET READER STATUS Set by product to 0
RFU, bit = 0 Set by product to 0
Eighth byte (Proactive SIM):
b8 b7 b6 b5 b4 b3 b2 b1
Proactive SIM: TIMER
MANAGEMENT (start, stop) Set by product to 1
Proactive SIM: TIMER
MANAGEMENT (get current value) Set by product to 1
Proactive SIM: PROVIDE LOCAL
INFORMATION (date, time and time
zone) Set by product to 0
Binary choice in GET INKEY Set by product to 0
SET UP IDLE MODE TEXT Set by product to 0
RUN AT COMMAND (e.g.. class "b"
is supported) Set by product to 0
2nd alpha identifier in SET UP
CALL Set by product to 0
2nd capability configuration
parameter (see 9.1.6) Set by product to 0
Ninth byte:
b8 b7 b6 b5 b4 b3 b2 b1
Sustained DISPLAY TEXT (see
6.4.1) Set by product to 0
SEND DTMF command (see 6.4.24) Set by product to 0
RFU, bit = 0
RFU, bit = 0
RFU, bit = 0
RFU, bit = 0
RFU, bit = 0
RFU, bit = 0
Subsequent bytes:
b8 b7 b6 b5 b4 b3 b2 b1
RFU, bit = 0