Multi-Tech Systems MMCModem GPRS (MTMMC-G) User Manual
Page 110
Chapter 13 – Specific AT Commands
Multi-Tech Systems, Inc. Wireless GSM/GPRS AT Commands (Document Number S000293I)
110
14
The rack has been detected as Open.
15
The modem received a NITZ information message from the network.
16
SMS and SMS CB services are ready.
For Event 10:
"
SM”
“FD”
“ON”
“SN”
“EN”
0 Not Reloaded from SIM (no change since last init or SIM remove)
1 Reloaded from SIM to internal memory (at least one entry has changed)
For Event 11:
Note:
If the service of the phonebook is not loaded or not present, the checksum is not displayed and
two commas without checksum are displayed (,,).
For Event 15:
hour, between the local time and GMT.
"yy/MM/dd,hh:mm:ss
±zzz" (Year/Month/Day,Hour:Min:Seconds± Time Zone).
The Time Zone indicates the difference, expressed in quarters of an hour,
between the local time and GMT.
Hexa string. LSA identity of the current cell in hexa format (3 bytes).
or summertime), the serving PLMN shall provide a DST parameter to indicate it.
The adjustment for DST can be + 1h or +2h.
Note:
For the NITZ indication, all the fields indicated here are optional. That is why there is an index
related to each of the following:
•
1: Full name for network
•
2: Short name for network
•
3: Local time zone
•
4: Universal time and local time zone
•
5: LSA identity
•
6: Network Daylight Saving Time
Syntax:
Command syntax: AT+WIND=
Command
Possible Responses
AT+WIND? +WIND:
0
OK
AT+WIND=255 OK
Note: The SIM has been removed.
+WIND: 0
Note :The SIM presence pin has been detected as “SIM
removed”
Note: The SIM has been inserted.
+WIND: 1
Note :The SIM presence pin has been detected as “SIM
inserted”
Note: The network service is available
for an emergency call
+WIND: 7
Note: The initialization has been
completed
+WIND: 4
Note: The modem received a NITZ
information message
+WIND: 15,1,"Cingular Extended",2,"Cingular",3,"+08",
4,"03/14/27,16:59:48+08",5,"123456",6,"2"