Multi-Tech Systems MMCModem GPRS (MTMMC-G) - Manual (Page 59)

Chapter 8 – Phonebook Commands
Multi-Tech Systems, Inc. Wireless GSM/GPRS AT Commands (Document Number S000293I) 59
Settings of a Phonebook Group +WPGS
Description: This commands sets the parameters of a phonebook group.
Values:
0 Read group settings
1 Write group settings
Index of the group
Parameter is optional if =1.
0
All refused. Incoming call is forwarded to the voice mailbox
1 All accepted. Incoming call is received (RING message is displayed)
Syntax: Command Syntax: AT+WPGS=,[,]
Command Possible responses
AT+WPGS=1,1,1
Note: Set restrict call to “All Accepted” OK
AT+WPGS=0,1
Note: Read group 1 settings +WPGS: 1,
OK
Note: Group1: all accepted
AT+WPGS=?
Note: Test command +WPGS: (0-1),(1-10),(0-1)
OK