Multi-Tech Systems MMCModem GPRS (MTMMC-G) - Manual (Page 68)

Chapter 9 – Short Messages Commands
Multi-Tech Systems, Inc. Wireless GSM/GPRS AT Commands (Document Number S000293I) 68
Read Message +CMGR
Description: This command allows the application to read stored messages. The messages are read from the
memory selected by the
+CPMS command.
Syntax: Command syntax: AT+CMGR=
Response syntax for text mode:
For SMS-DELIVER only
+CMGR: ,,[,] [,,,,,,,]
For SMS-SUBMIT only
+CMGR: ,,[,] [,,,,, [], ,
,]
For SMS-STATUS-REPORT only)
+CMGR: ,,,[],[],,
Response syntax for PDU mode:
+CMGR: , [] ,
Notes: A message read with status “REC UNREAD” will be updated in memory with the status “REC READ”.
The parameter for the SMS Status Reports is always “READ”.
Syntax: Command Syntax: AT+CMGR=
Command Possible responses
AT+CMTI: “SM”,1
Note: New message received
AT+CMGR=1
Note: Read the message +CMGR: “REC UNREAD”,”0146290800”,
”98/10/01,18:22:11+00”,
ABCdefGHI
OK
AT+CMGR=1
Note: Read the message again +CMGR: “REC UNREAD”,”0146290800”,
”98/10/01,18:22:11+00”,
ABCdefGHI
OK
Note: Message is read now
AT+CMGR=2
OK
Note: Location empty
AT+CMGF=0 ;+CMGR=1
Note: In PDU mode +CMGR: 2,,
OK
Note: Message is stored but unsent, no field
AT+CMGF=1;+CPMS=”SR”;+CNMI=,,,2
Reset to text mode, set read memory to
“SR”, and allow storage of further SMS
Status Report into “SR” memory OK
AT+CMSS=3
Send an SMS previously stored +CMSS: 160
OK
+CDSI: “SR”,1
New SMS Status Report stored in “SR” memory at
index 1
AT+CMGR=1
Read the SMS Status Report +CMGR: "REC UNREAD",6,160, "+33612345678",129,
"01/05/31,15:15:09+00",
"01/05/31,15:15:09+00",0
OK