Multi-Tech Systems MMCModem GPRS (MTMMC-G) - Manual (Page 65)

Chapter 9 – Short Messages Commands
Multi-Tech Systems, Inc. Wireless GSM/GPRS AT Commands (Document Number S000293I) 65
Save Settings +CSAS
Description: All settings specified by the +CSCA and +CSMP commands are stored in EEPROM if the SIM card is a
Phase 1 card or in the SIM card if it is a Phase 2 SIM card.
Values: No parameters
Syntax: Command Syntax: AT+CSAS
Command Possible responses
AT+CSAS
Note: Store +CSCA and +CSMP parameters OK
Note: Parameters saved
Restore Settings +CRES
Description: All settings specified in the +CSCA and +CSMP commands are restored from EEPROM if the SIM card
is Phase 1 or from the SIM card if it is a Phase 2 SIM card.
Values: No parameters
Syntax: Command Syntax: AT+CRES
Command Possible responses
AT+CRES
Note: Restore +CSCA and +CSMP parameters OK
Note: Parameters restored
Show Text Mode Parameters +CSDH
Description: This command gives additional information about text mode result codes. This information can be found
in the description of the +CMT, +CMGR, +CMGL commands.
Values: : show indicator
0 do not show header values
1 show the values in result codes
Syntax: Command Syntax: AT+CSDH
Command Possible responses
AT+CSDH=0
Note: Set value to “do not how” OK
AT+CSDH?
Note: Current value +CSDH: 0
OK
Note: Do not show header values