Multi-Tech Systems MMCModem GPRS (MTMMC-G) - Manual (Page 129)

Chapter 13 – Specific AT Commands
Multi-Tech Systems, Inc. Wireless GSM/GPRS AT Commands (Document Number S000293I) 129
Network Operator Name +WNON
Description: This indication provides the name of the network operator (as a character string). This command is the
response to the AT+CPHS 2,5 [,] command.
Values: format>
0 Long format operator name
1 Short format operator name. Default.
The name of the operator in long or short format
Syntax: Command Syntax: AT+CHPS=2,5[, format>]
Response Syntax: +WNON: ,
Command Possible responses
AT+CPHS=2,5
Note: Get Operator Name +WNON: 0,”Orange F”
OK
AT+CPHS=2,5,1
Note: Get short format Operator Name +WNON: 1,”Orange”
OK
AT+CPHS=2,5,0 +CME ERROR: 3
Note: CPHS feature is not allowed or format name is not
accessible
AT+CPHS=2,5,1 +CME ERROR: 3
Note: CPHS feature is not allowed or format name is not
accessible
AT+CPHS=0,5
Note: Deactivatation of Network
Operator Name feature OK
Note: No effect
CPHS Information +WCPI
Description: This indication provides CPHS information; i.e., which data fields are present in the SIM. This command
is the response to the AT+CPHS 2,6 [,] command.
Values: value indicating the field of CPHS information
If field is omitted in the AT+CPHS command, all fields of CPHS Information will be
displayed.
0 data field is set
1 data field is unset
When all CPHS Information is requested, the status corresponds to a bit field. See Codes and
Values in the Appendix.
Note: The field CSP Service ( = 1) is used to set the CSP feature at initialization.
Syntax: Command Syntax: AT+CHPS=2,6[,]
Response Syntax: +WCPI: , `
Command Possible responses
AT+CPHS=2,6
Note: Get current status for all CPHS Information fields +WCPI: 0,”0033000F”
OK
AT+CPHS=2,6,13
Note: Get the current status of Call Forward Activated
Indicator for Line 1 +WCPI: 13,1
OK
Note: Call Forward is active for Line 1
AT+CPHS=2,6,22
Note: Get current status for Line 2 Mailbox Number +WCPI: 22,0
OK
Note: Mailbox Number for Line 2 is not
available
AT+CPHS=2,6,17
+CME ERROR: 3
Note: Wrong data field
AT+CPHS=2,6,22
Note: Get current status for Line 2 Mailbox Number +CME ERROR: 3
Note: CPHS feature is not allowed
AT+CPHS=0,6
Note: Deactivatation of CPHS Information feature OK
Note: No effect